- Home
- ยป
- Our Products
- »
- Aluminium Products
Aluminium Products

Aluminium Rod
Material | Aluminium |
Shape | Round |
Surface Finish | Coated |
Grade | Gr1,2,3,4,5,7,9,11,12 |
Diameter | 2-4500 mm |
Length | up to 3500mm |
Specifications:
- Diameter: 2-4500mm
- Length: up to 3500mm
- Grade: Gr1,2,3,4,5,7,9,11,12
- weight: 4.51g/cm3
- Application: Industrial
- Shape: Round
5454 Aluminum Alloys
Material | ALUMINUM |
Color | Silver |
Grade | 5454 |
Shape | Rectangle |
Surface Treatment | Anodized |
Technique | Hot Rolled |
Specifications:
Element | Content (%) |
Aluminium / Aluminum, Al | 96.3 |
Magnesium, Mg | 2.7 |
Chromium, Cr | 0.12 |
Manganese, Mn | 0.8 |
Physical Properties:
Properties | Metric | Imperial |
Density | 2.6-2.8 g/cm3 | 0.0939-0.1011 lb/in3 |
Melting point | 607°C | 1125°F |
Mechanical Properties:
Properties | Metric | Imperial |
Elastic modulus | 70-80 GPa | 10152-11603 ksi |
Poisson's ratio | 0.33 | 0.33 |
Thermal Properties:
Properties | Conditions | ||
T (ºC) | Treatment | ||
Thermal conductivity | 134 (W/mK) | 25 | All |
Other Designations:
- ASTM B209
- ASTM B221
- ASTM B234
- ASTM B241
- ASTM B404
- ASTM B547
- ASTM B548
- QQ A-200/6
- QQ A250/10
- SAE J454
2014 Aluminum Alloys
Material | Aluminium |
Color | Silver |
Grade | 2014 |
Shape | Rectangle |
Usage/Application | Commercial |
Anodized | Yes |
Specifications:
Element | Content (%) |
Aluminium / Aluminum, Al | 93.5 |
Copper, Cu | 4.4 |
Silicon, Si | 0.8 |
Magnesium, Mg | 0.5 |
Cromium, Cr | 0.1 (Max) |
Manganese, Mn | 0.6 |
Physical Properties:
Properties | Metric | Imperial |
Density | 2.8 g/cm3 | 0.1018 lb/in3 |
Melting point | 510°C | 950°F |
Mechanical Properties:
Properties | Metric | Imperial |
Elastic modulus | 70-80 GPa | 10152-11603 ksi |
Poisson's ratio | 0.33 | 0.33 |
Thermal Properties:
Properties | Conditions | ||
T (ºC) | Treatment | ||
Thermal expansion | 23 (10-6/ºC) | 20-100 | - |
Thermal conductivity | 192 (W/mK) | 25 | O |
Other Designations:
ASTM B210 | ASTM B211 | ASTM B221 | ASTM B241 | ASTM B247 |
ASTM BB241 | DIN 3.1255 | MIL T-15089 | QQ A-200/2 | QQ A-225/4 |
QQ A-250/4 | QQ A-367 | SAE J454 |
6082 Aluminum Alloy Plates
Product Brochure
Shape | Rectangular |
Thickness | 10 mm |
Brand | PM |
Type | Plate |
Finish | Polished |
Tensile Strength | 205 Min MPa |
Material | Aluminum Alloy |
Table 1. Chemical composition for aluminium alloy 6082:
Element | % Present |
Si | 0.7-1.3 |
Fe | 0.0-0.5 |
Cu | 0.0-0.1 |
Mn | 0.4-1.0 |
Mg | 0.6-1.2 |
Zn | 0.0-0.2 |
Ti | 0.0-0.1 |
Cr | 0.0-0.25 |
Al | Balance |
Table 2 (a). Mechanical properties for aluminium alloy 6082 Soft O:
BS EN 485-2:2008 Sheet 0.4mm to 6.00mm | |
Property | Value |
Proof Stress | 85 Max MPa |
Tensile Strength | 150 Max MPa |
Hardness Brinell | 40 HB |
Table 2 (b). Mechanical properties for aluminium alloy 6082 T4:
BS EN 755-2:2008 Extruded Rod,Bar,Tube & Profiles Up to 200mm Dia.or A/F, Up to 25mm WT tube & Prof | |
Property | Value |
Proof Stress | 110 Min MPa |
Tensile Strength | 205 Min MPa |
Elongation A50 mm | 12 Min % |
Hardness Brinell | 70 HB |
Elongation A | 14 Min % |
Specifications:
- Grade: 6000 Series
- Technique: Quenched
- Temper: T3 - T8
- Trademark: Baodi
- Type: Aluminum Sheets
- Shape: Rectangular
- Surface Treatment: Mill Finish
- Alloy: Alloy
- Certification: ASTM, GB/T
- Specification: RHOS
Table 2 (c). Mechanical properties for aluminium alloy 6082 T6:
BS EN 755-2:2008 Rod & Bar Up to 20mm Dia. & A/F | |
Property | Value |
Proof Stress | 250 Min MPa |
Tensile Strength | 295 Min MPa |
Elongation A50 mm | 6 Min % |
Hardness Brinell | 95 HB |
Elongation A | 8 Min % |
6061 Aluminium Alloy
Material | ALUMINIUM |
Color | Silver |
Brand | PM |
Grade | 6061 |
Shape | Rectangle |
Anodized | Yes |
Component | Amount (wt.%) |
Aluminium | Balance |
Magnesium | 0.8-1.2 |
Silicon | 0.4 – 0.8 |
Iron | Max. 0.7 |
Copper | 0.15-0.40 |
Zinc | Max. 0.25 |
Titanium | Max. 0.15 |
Manganese | Max. 0.15 |
Chromium | 0.04-0.35 |
Others | 0.05 |
Typical properties of aluminium alloy 6061 include:
- Medium to high strength
- Good toughness
- Good surface finish
- Excellent corrosion resistance to atmospheric conditions
- Good corrosion resistance to sea water
- Can be anodized
- Good weldability and brazability
- Good workability
- Widely available
Specifications:
- Melting Point: Approx 580°C
- Modulus of Elasticity: 70-80 GPa
- Poissons Ratio: 0.33
Mechanical Properties:
Temper | Ultimate Tensile Strength (MPa) | 0.2% Proof Stress (MPa) | Brinell Hardness (500kg load, 10mm ball) | Elongation 50mm dia (%) |
0 | 110-152 | 65-110 | 30-33 | 14-16 |
T1 | 180 | 95-96 | 16 | |
T4 | 179 min | 110 min | ||
T6 | 260-310 | 240-276 | 95-97 | 9-13 |
He 30 Aluminum Alloy
Material | Metal Alloy |
Color | Silver |
Grade | HE 30 |
Shape | Square |
Usage/Application | Commercial |
Brand | PM |
Chemical Composition Limits | |||||||||||
Weight% | Al | Si | Fe | Cu | Mn | Cr | Mg | Zn | Ti | Other Each | Others Total |
6082 | Bal | 0.7 - 1.3 | 0.50 max | 0.10 max | 0.40-1.00 | 0.25 max | 0.06-1.20 | 0.20 max | 0.10 max | 0.05 max | 0.15 max |
Typical Mechanical Properties:
Material | Thickness (mm) | Tensile Strength (N/mm²) min | Yield Strength (N/mm²) min | Elongation on 50mm % (min) |
Alloy 6082 - T6 Sheet and Plate | 0.2 - 3.0 | 295 | 255 | 8 |
Alloy 6082 T6 Sheet and Plate | 3.0 - 6.0 | 295 | 240 | 8 |
Alloy 6082 T6 Sheet and Plate | 6.0 - 25.00 | 295 | 240 | 8 |
Specifications:
Material | Diameter (mm) | Tensile Strength min (N/mm²) | Yield Strength min (N/mm²) | Elongation on 5.65v % (min) |
Alloy 6082 T6 Bar | < 20 | 295 | 255 | 8 |
Alloy 6082 T6 Bar | 20 - 150 | 310 | 270 | 8 |
Alloy 6082 T6 Bar | 150 - 200 | 280 | 240 | 5 |
Availability:
- Aluminum Alloy 6082 is available in Sheet and Plate (typical stock availabillity) , Aluminum 6082 Bar, 6082 is also available in Drawn Tube, Tube and Forging Stock. For all stock availability of Aluminium Alloy 6082 contact Sales
Specifications:
- Aluminium alloy 6082 also corresponds to the following standard designations and specification
- AA6082
- HE30, HP30, HS30
- DIN 3.2315
- EN AW-6082
- ISO AlSi1MgMn
- A96082
Aluminum Magnesium Alloys
Material | Aluminium |
Color | Silver |
Shape | Round |
Diameter | 0.1mm - 3.0mm |
Surface Finish | Coated |
Usage/Application | Commercial |
Specifications:
- Material:Aluminum Wire
- Carbon Content:Low Carbon
- PCD:No
- ET:No
- Hole:No Hole
- Diameter:0.1mm-3.0mm
- Cross Sectional Shape:Round
- Application:Protecting Mesh
- Type:Bare Wire
- Surface Treatment:Coated
- Metal Wire Drawing:Hot Drawing
- Status:Soft State
- Thickness:Metal Filament
- Trademark:OEM
Aluminium Alloy
Material | Aluminium |
Color | Silver |
Shape | Round |
Usage/Application | Commercial |
Brand | PM |
Type | Aluminium Sliding Window |
Available Alloy Grades:
- 5083, 5086, 5454, 5052 and 5456 (Approved from societies such as : ABS or DNV)
Specifications:
- Opening Pattern: Horizontal
- Surface Finishing: Finished
- Brand Name: Kz
- Open Type: Sliding/Horizontal
- Frame Profile Thickness: 1.4mm
- Surface Treatment: Powder Coating, Customized
- Hardware: Crescent Lock, Customized
- Transport Package: Carton, Iron Racked etc
- Material: Aluminum Alloy
- Frame Material: Aluminum Alloy
- Style: Modern
- Function: Heat Insulation, Soundproof, Anti-Theft, Airproof, Insect-proof, Dust-proof
- Security Rating: A
- Type: Aluminium Sliding Window
- Profile Colour: Customized
- Glass: Customized
Hindalco Aluminum Rod
Material | Aluminium |
Single Piece Length | 18 meter, 6 meter, 3 meter, 36 meter |
Shape | Round |
Brand | PM |
Color | Silver |
Is It Anodised | Anodised |
Characteristics:
- High tensile strength,
- Ductile
- Resistance to corrosion
- Highly durable
- Heat resistant
- Low maintenance cost
- Toughness
- Economical
Applications:
- Shipping industry
- Refineries industry
- Automobiles industry
- Textile machinery industry
- Tannery equipments industry
- Pump and valves industry
Specifications:
- Bulk density: 1.68-1.85g/cm33
- Application: Cable material
- Material: alminum
- Diameter: 9.5mm/12mm/15mm Etc
3003 Aluminium Plate
Shape | Rectangular |
Material | Aluminium |
Brand | PM |
Surface Treatment | Mill Finish |
Color | Silver |
Finishing | Anodized |
- Alloy: Alloy
- Certification: ASTM, GB/T, EN, ASTMB
- Length: 100 to 6000mm
- Origin: Zhejiang Province
- Type: Aluminum Sheets
- Shape: Flat
- Surface Treatment: Mill Finish
- Temper: O - H112
- Width: 100 to 2650 mm
- Thickness: 0.5 to 300mm
Aluminium Ingots
Anodised | No |
Weight | 1 KGS |
Brand | PM |
Is It Anodised | Anodised |
Form | Ingots |
Material | Aluminium |
Color | Silver |
Indium Ingot
Material | Indium |
Brand | PM |
Color | Silver |
Form | Ingot |
Shape | Rectangle |
Application | Industrial |
It is useful for making low-melting alloys. Indium is used in making bearing alloys, germanium transistors, rectifiers, thermistors, and photoconductors; and used in solders and etc.
Aluminum Alloy 7068
Minimum Order Quantity | 10 Kilogram |
Material | Aluminium |
Grade | 7068 |
Is It Anodised | Anodised |
Size | PLATE & ROD |
Type | Alloy |
Application | Industrial |
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
- Port of Dispatch: COURIER
- Production Capacity: 1000 KGS
- Delivery Time: 4 TO 5 DAYS
- Packaging Details: AS PER DEMAND
Aluminium Sheet
- Thickness: 6-180mm
- Width: 200-1500mm
- Application: Industrial use
- Grade: 7000 Series
- Temper: T351-T851
1350 Aluminium
Material | Aluminium |
Brand | PM |
Series | 1350 |
Surface Treatment | Galvanized |
Application | Commercial |
Trademark | HAOMEI |
Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others-Each | Others Total | Al Min | |
1350 | 0.1 | 0.4 | 0.05 | 0.05 | – | 0.01 | 0.05 | – | 0.03 | 0.1 | 99.5 |
Specifications:
- Grade: 1000 Series
- Technique: Cold Drawn
- Temper: O - H112
- Trademark: HAOMEI
- Type: Aluminum Strips
- Shape: Flat
- Surface Treatment: Mill Finish
- Alloy: Non-alloy
- Metal: Aluminum
Aluminum Standards & Data and United Aluminum data base:
Alloy-Temper | Tensile Strength (ksi) | Yield Strength (ksi) | Elongation (%) |
1350-O | 12 | 4 | 34 |
1350-H14 | 16 | 14 | 3 |
1350-H19 | 27 | 24 | 2 |
5005 Aluminium
Material | Aluminum |
Brand | PM |
Shape | Round |
Melting Point | 655 Degree C |
Surface Treatment | Anodized |
Application | Commercial |
Specifications:
- Applications: Alloy 5005 is typically used for
- Buildings:Roofing, Cladding, Corrugated Sheet
- Food & Chemical Equipment
- Furniture
- Anodised Parts
- HVAC Equipment
- Packaging
- Pipe and Tube
- Can Bodies
Chemical Element | % Present |
Manganese (Mn) | 0.0 - 0.20 |
Iron (Fe) | 0.0 - 0.70 |
Copper (Cu) | 0.0 - 0.20 |
Magnesium (Mg) | 0.50 - 1.10 |
Silicon (Si) | 0.0 - 0.30 |
Zinc (Zn) | 0.0 - 0.25 |
Chromium (Cr) | 0.0 - 0.10 |
Other (Each) | 0.0 - 0.05 |
Others (Total) | 0.0 - 0.15 |
Aluminium (Al) | Balance |
Physical Property | Value |
Density | 2.70 g/cm³ |
Melting Point | 655 °C |
Thermal Expansion | 23.5 x10^-6 /K |
Modulus of Elasticity | 69.5 GPa |
Thermal Conductivity | 201 W/m.K |
Electrical Resistivity | 0.033 x10^-6 Ω .m |
Electrical Resistivity | 52 % IACS |
Mechanical Property | Value |
Tensile Strength | 145 - 185 MPa |
Proof Stress | 110 Min MPa |
Hardness Brinell | 47 HB |
5251 Aluminium
Material | Aluminium |
Density | 2.69 g/cm3 |
Melting Point | 625 Degree C |
Modulus of Elasticity | 70 GPa |
Thermal Conductivity | 134 W/m.K |
Thermal Expansion | 25x10-6 /K |
Table 1. Chemical composition for aluminium alloy 5251:
Property | Value |
Density | 2.69 g/cm3 |
Melting Point | 625°C |
Modulus of Elasticity | 70 GPa |
Electrical Resistivity | 0.044x10-6 Ω.m |
Thermal Conductivity | 134 W/m.K |
Thermal Expansion | 25x10-6 /K |
Table 2 (a). Mechanical properties for aluminium alloy 5251 Soft O:
BS EN 485-2:2008 Sheet and Plate 0.2mm to 4mm | |
Property | Value |
Proof Stress | 170 Min MPa |
Tensile Strength | 230 - 270 MPa |
Hardness Brinell | 69 HB |
Table 2 (b). Mechanical properties for aluminium alloy 5251 H22:
BS EN 485-2:2008 Sheet & Plate 0.2mm to 12.5mm | |
Property | Value |
Proof Stress | 140 Min MPa |
Tensile Strength | 210 - 250 MPa |
Hardness Brinell | 62 HB |
Specifications:
- Grade: 1000 Series
- Technique: Cold Drawn
- Temper: O - H112
- Thickness: 1.0-3.0mm
- MOQ: 5tons
- Export Market: Global
- Trademark: K
- Type: Aluminum Sheets
- Shape: Rectangular
Table 2 (c). Mechanical properties for aluminium alloy 5251 H24:
BS EN 485-2:2008 Sheet and Plate 0.2mm to 25mm | |
Property | Value |
Proof Stress | 120 Min MPa |
Tensile Strength | 190 - 230 MPa |
Hardness Brinell | 56 HB |
Table 2 (d). Mechanical properties for aluminium alloy 5251 H26:
BS EN 485-2:2008 Sheet and Plate 0.2mm to 50.00mm | |
Property | Value |
Proof Stress | 60 Min MPa |
Tensile Strength | 160 - 200 MPa |
Hardness Brinell | 44 HB |
Table 3. Physical properties for aluminium alloy 5251:
Element | % Present |
Cu | 0.15 |
Mg | 1.7-2.4 |
Si | 0.4 |
5083 Aluminum
Product Brochure
Material | Aluminium |
Certification | ASTM, GB/T, EN, ASTMB |
Color | Silver |
Length | 100 to 6000mm |
Trademark | Yong hong |
Shape | Flat |
Table 1. Chemical composition for aluminium alloy 5083:
Element | % Present |
Si | 0.4 |
Fe | 0.4 |
Cu | 0.1 |
Mn | 0.4-1.0 |
Mg | 4.0-4.9 |
Zn | 0.25 |
Ti | 0.15 |
Cr | 0.05-0.25 |
Al | Balance |
Table 2 (a). Mechanical properties for aluminium alloy 5083 Soft O/H111:
BS EN 485-2:2008 Sheet 0.2 - 6.3mm Thick | |
Property | Value |
Proof Stress | 125 Min MPa |
Tensile Strength | 275 - 350 MPa |
Hardness Brinell | 75 HB |
Table 2 (b). Mechanical properties for aluminium alloy 5083 Soft O/H111:
BS EN 485-2:2008 Plate 6.3mm to 80mm | |
Property | Value |
Proof Stress | 115 Min MPa |
Tensile Strength | 270 - 345 MPa |
Hardness Brinell | 75 HB |
Specifications:
- Grade: 3xxx,5xxx, 6xxx
- Alloy: Alloy
- Certification: ASTM, GB/T, EN, ASTMB
- Length: 100 to 6000mm
- Trademark: yong hong
- Origin: Zhejiang Province
- Type: Aluminum Sheets
- Shape: Flat
- Surface Treatment: Mill Finish
- Temper: O - H112
- Width: 100 to 2650 mm
- Thickness: 0.5 to 300mm
Table 2 (c). Mechanical properties for aluminium alloy 5083 Soft O/H111:
BS EN 485-2:2008 Plate 80mm to 120mm | |
Property | Value |
Proof Stress | 110 Min MPa |
Tensile Strength | 260 Min MPa |
Hardness Brinell | 70 HB |
Elongation A |
5086 Aluminum
Material | Aluminium |
Brand | PM |
Grade | 1000 Series |
Technique | Extruded |
Thickness | 0.5- 200 mm |
Length | Max 11600 mm |
5086 Aluminium have strong corrosion resistance characteristics and high electrical conductivity. These alloys are sensitive to high temperatures ranging between 200 and 250°C (392 and 482°F) and tend to lose their strength. They are good low-temperature alloys and gain strength when exposed to subzero temperatures.Aluminium / Aluminum 5086 alloy is a high strength structural alloy. The following data sheet provides an overview of Aluminium / Aluminum 5086 alloy.
Chemical Composition:
Element | Content (%) |
Al | 95.4 |
Mg | 4 |
Cr | 0.15 |
Mn | 0.4 |
Physical Properties:
Properties | Metric | Imperial |
Density | 2.65 g/cm3 | 0.0957 lb/in3 |
Melting point | 588°C | 1090°F |
Mechanical Properties:
Properties | Metric | Imperial |
Elastic modulus | 70-80 GPa | 10152-11603 ksi |
Poisson's ratio | 0.33 | 0.33 |
Thermal Properties:
Properties | Conditions | ||
T (ºC) | Treatment | ||
Thermal expansion | 23.9 (10-6/ºC) | 20-100 | - |
Thermal conductivity | 127 (W/mK) | 25 | All |
Other Designations:
ASTM B209 | ASTM B210 | ASTM B221 | ASTM B241 | ASTM B313 |
ASTM B345 | ASTM B361 | ASTM B547 | ASTM B548 | MIL C-26094 |
MIL S-24149/2 | QQ A-200/5 | QQ A-250/7 | SAE J454 | QQ WW-T-700/5 |
Applications:
- Aluminium / Aluminum 5086 alloy is used in missile components, unfired and welded pressure vessels, auto aircraft cryogenics, TV towers, drilling rigs, transportation equipment, tanks and marine components
Specifications:
- Grade: 1000 Series
- Technique: Extruded
- Temper: O - H112
- Thickness: 0.5- 200mm
- Length: Max 11600mm
- Specification: Thickness 0.5-350mm
- HS Code: 7606129000
- Type: Aluminum Sheets
- Shape: Flat
- Surface Treatment: Mill Finish
- Alloy: Non-alloy
- Certification: ASTM, JIS, GB/T, EN, ASTMB
- Width: Max 2400mm
5154 Aluminum
Material | Aluminum |
Surface | Anodized |
Shape | Rectangle |
Finish | Polished |
Temperatures | 200 and 250 Degree Celcius |
Electric Fence | White |
5154 Aluminium have strong corrosion resistance. These alloys are sensitive to high temperatures ranging between 200 and 250°C (392 and 482°F), and tend to lose some of their strength. However, the strength of the aluminium / aluminum alloys can be enhanced at subzero temperatures, making them ideal low-temperature alloys.
Chemical Composition:
Element | Content (%) |
Aluminium / Aluminum, Al | 96.2 |
Magnesium, Mg | 3.5 |
Chromium, Cr | 0.25 |
Physical Properties:
Properties | Metric | Imperial |
Density | 2.66 g/cm3 | 0.3489 lb/in3 |
Mechanical Properties:
Properties | Metric | Imperial |
Elastic modulus | 70-80 Gpa | 10152-11603 ksi |
Poisson’s ratio | 0.33 | 0.33 |
Thermal Properties:
Properties | Metric | Imperial |
Thermal conductivity (@25ºC/77ºF) | 127 W/mK | 881 BTU in/hr.ft².°F |
Thermal expansion (@20-100ºC/68-212ºF) | 23.9 x 10-6/ºC | 75x 10-6/ºF |
Other Designations:
- ASTM B209
- ASTM B210
- ASTM B211
- ASTM B221
Applications:
- The aluminium / aluminum 5154 alloy is widely used in the manufacture of welded structures, storage tanks, and pressure vessels. It is also used in salt water service
Specifications:
- Application: Cable
- Feature: Waterproof
- Bunched: White
- Conductor Type: Solid
- Material Shape: Round Wire
- Trademark: SINOEAST
- Origin: Tianjin China
- Insulation Level: C
- Brand: Sinoeast
- Conductor Material: Aluminum
- Electric Fence: White
- Type: Bare
- Insulation Material: Enameled
- Range of Application: Cable
5754 Aluminum
Product Brochure
Material | Aluminium |
Model | 5754 |
Color | Silver |
Finish | Plated |
Shape | Square |
Application | Industrial |
Element | % Present |
Si | 0.4 |
Fe | 0.4 |
Mn | 0.5 |
Mg | 2.6-3.2 |
Al | Balance |
Zn | 0.003 |
Other | 0.0015 |
Al | Balance |
Table 2 (a). Mechanical properties for aluminium alloy 5754 H111 Treadplate:
BS EN 485-2:2008 Sheet 0.2mm to 6.00mm | |
Property | Value |
Proof Stress | 60 Min MPa |
Tensile Strength | 160 - 200 MPa |
Elongation A50 mm | 12 Min % |
Hardness Brinell | 44 HB |
Table 2 (b). Mechanical properties for aluminium alloy 5754 H114:
BS EN 485-2:2008 Aluminium Sheet 0.2mm to 6.00mm | |
Property | Value |
Proof Stress | 80 Min MPa |
Tensile Strength | 190 - 260 MPa |
Elongation A50 mm | 12 Min % |
Hardness Brinell | 52 HB |
Specifications:
- Grade: 5000 Series
- Technique: Mill Finished
- Temper: O - H112
- Payment: Tt or LC
- Trademark: YONGHONG
- Type: Aluminum Sheets
- Shape: Flat
- Surface Treatment: Oxidized
- Alloy: Alloy
- Certification: ASTM, JIS, GB/T, EN, ASTMB
- Surface: Anodized
- Specification: SGS
Table 2 (c). Mechanical properties for aluminium alloy 5754 H22:
BS EN 485-2:2008 Sheet & Plate 0.2mm to 40mm | |
Property | Value |
Proof Stress | 130 Min MPa |
Tensile Strength | 220 - 270 MPa |
Elongation A50 mm | 7 Min % |
Hardness Brinell | 63 HB |
2011 Aluminium
Material | Aluminium |
Brand | PM |
Grade | 2011 |
Color | Grey |
Application | Industrial |
Cross Section | Square |
Element | % Pre sent |
Si | 0.004 |
Fe | 0.007 |
Cu | 5.0-6.0% |
Pb | 0.2-0.6% |
Bi | 0.2-0.6% |
Zn | 0.003 |
Other | 0.0015 |
Al | Balance |
Table 2 (a). Mechanical properties for aluminium alloy 2011 T4:
BS EN 755-2:2008 Rod and Bar Up to 200mm Dia. or 60mm A/F | |
Property | Value |
Proof Stress | 125 Min MPa |
Tensile Strength | 275 Min MPa |
Elongation A50 mm | 12 min % |
Hardness Brinell | 95 HB |
Elongation A | 14 min % |
Table 2 (b). Mechanical properties for aluminium alloy 2011 T6:
BS EN 755-2:2008 Rod and Bar Up to 75mm Dia. | |
Property | Value |
Proof Stress | 230 Min MPa |
Tensile Strength | 310 Min MPa |
Elongation A50 mm | 6 min % |
Hardness Brinell | 110 HB |
Elongation A | 8 min % |
Table 3. Physical properties for aluminium alloy 2011:
Property | Value |
Density | 2.82 kg/m3 |
Melting Point | 535°C |
Modulus of Elasticity | 71 GPa |
Electrical Resistivity | 0.045x10-6 Ω.m |
Thermal Conductivity | 138 W/m.K |
Thermal Expansion | 23x10-6 /K |
Specifications:
- AlCu6BiPb
- FC1
- A92011
- CB60
- 3.1655
- AlCuBiPb
2024 Aluminium
Material | Aluminium |
Color | Silver |
Shape | Rectangle |
Finish | Coated |
Anodized | Yes |
Application | Industrial |
Specifications:
Element | Content (%) |
Aluminium / Aluminum, Al | 93.5 |
Copper, Cu | 4.4 |
Magnesium, Mg | 1.5 |
Manganese, Mn | 0.6 |
Physical Properties:
Properties | Metric | Imperial |
Density | 2.77 g/cm3 | 0.10007 lb/in3 |
Melting point | 510°C | 950°F |
Mechanical Properties:
Properties | Metric | Imperial |
Elastic modulus | 70-80 Gpa | 10152-11603 ksi |
Poisson's ratio | 0.33 | 0.33 |
Thermal Properties:
Properties | Metric | Imperial |
Thermal expansion (@20-100ºC/68-212ºF) | 22.8 (10-6/ºC) | 12.71 µin/in°F |
Thermal conductivity (@25ºC/77ºF) | 190 (W/mK) | 1319 BTU in/hr.ft².°F |
Other Designations:
AMS 4037 | AMS 4120 | AMS 4192 | AMS 7223 | ASTM B209 |
ASTM B210 | ASTM B211 | ASTM B221 | ASTM B241 | ASTM B316 |
ASTM F467 | ASTM F468 | DIN 3.1355 | MIL B-6812 | QQ A-430 |
MIL T-50777 | QQ A-200/3 | QQ A-225/6 | QQ A-250/4 | MIL T-15089 |
SAE J454 | QQ WW-T-700/3 |
6063 Aluminium
Material | Aluminium |
Grade | 6063 |
Finish | Coated |
Application | Industrial |
Color | Silver |
Anodized | Yes |
6063 Aluminium is a medium strength alloy commonly referred to as an architectural alloy. It is normally used in intricate extrusions.It has a good surface finish, high corrosion resistance, is readily suited to welding and can be easily anodised. Most commonly available as T6 temper, in the T4 condition it has good formability.
Aluminium alloy 6063 is used in:
- Architectural applications
- Extrusions
- Window frames
- Doors
- Shop fittings
- Irrigation tubing
Specifications:
AA6063 | Al Mg0.7Si |
GS10 | AlMgSi0.5 |
A-GS | 3.32206 |
ASTM B210 | ASTM B221 |
ASTM B241 (Pipe- Seamless) | ASTM B345 (Pipe- Seamless) |
ASTM B361 | ASTM B429 |
ASTM B483 | ASTM B491 |
MIL G-18014 | MIL G-18015 |
MIL P-25995 | MIL W-85 |
QQ A-200/9 | SAE J454 |
UNS A96063 | HE19 |
Table 1. Chemical composition for aluminium alloy 6063 and 6063A:
Element | 6063 % Present | 6063A % Present |
Si | 0.2 to 0.6 | 0.3 to 0.6 |
Fe | 0.0 to 0.35 | 0.15 to 0.35 |
Cu | 0.0 to 0.1 | 0.1 |
Mn | 0.0 to 0.1 | 0.15 |
Mg | 0.45 to 0.9 | 0.6 to 0.9 |
Zn | 0.0 to 0.1 | 0.0 to 0.15 |
Ti | 0.0 to 0.1 | 0.1 |
Cr | 0.1 max | 0.05 |
Al | Balance | Balance |
Annealed wrought alloyThe most common tempers for 6063 aluminium are:
- T4 – Solution heat treated and naturally aged
- T6 – Solution heat treated and artificially aged
BS EN 755-2:2008 Rod & Bar Up to 200mm Dia. | |
Property | Value |
Tensile Strength | 130 Max MPa |
Elongation A50 mm | 16 Min % |
Hardness Brinell | 25 HB |
Elongation A | 18 Min % |
7020 Aluminum
Material | ALUMINUM |
Grade | 7020 |
Brand | PM |
Finish | Coated |
Anodized | YEs |
Shape | Rectangle |
The principal alloying ingredients in 7020 Aluminium alloys include manganese, magnesium, copper, zinc and silicon.
Chemical Composition:
Element | Content (%) |
Zinc, Zn | 4-5 |
Magnesium, Mg | 1-1.40 |
Zirconium, Zr + Titanium, Ti | 0.80 - 0.25 |
Iron, Fe | 0.4 |
Silicon, Si | 0.35 |
Copper, Cu | 0.2 |
Chromium, Cr | 0.10 - 0.35 |
Zirconium, Zr | 0.080 - 0.20 |
Manganese, Mn | 0.050 - 0.50 |
Other (each) | 0.05 max |
Other (total) | 0.15 max |
Aluminum, Al | Remainder |
Physical Properties:
Properties | Metric | Imperial |
Density | 2.78 g/cm³ | 0.100 lb/in³ |
Mechanical Properties:
Properties | Metric | Imperial |
Tensile strength (@thickness ≤100 mm/≤3.94 in) | ≥ 350 MPa | ≥ 50800 psi |
Yield strength (@thickness ≤100 mm/≤3.94 in) | ≥ 280 MPa | ≥ 40600 psi |
Elongation at break (@thickness ≤100 mm/≤3.94 in) | ≥ 10% | ≥ 10% |
Thermal Properties:
Properties | Metric | Imperial |
Thermal expansion co-efficient (@20-100°C/68-212°F) | 23.1 µm/m°C | 12.8 µin/in°F |
Thermal conductivity | 137 W/mK | 951 BTU in/hr.ft².°F |
Other Designations:
- BS H17
- BA 733
- EN AW - AlZn4, 5Mg
- WS 3.4335
- Hiduminium-45
- Alcan GB-D74S
Applications:
- Frame manufacture, e.g. motorbike or bicycle frames
- Military bridges
- In armored vehicles.
7075 Aluminum
Material | Aluminium |
Brand | PM |
Shape | Round |
Finish | Polished |
Application | Industrial |
Grade | 7075 |
Aluminum alloys have high strength at subzero temperatures. However, their strength can be reduced at high temperatures.7075 Aluminium alloy is a heat treatable alloy. It has high toughness, strong mechanical strength, and good stress corrosion cracking resistance. The following datasheet gives an overview of Aluminium / Aluminum 7050 alloy.
Chemical Composition:
Element | Content (%) |
Aluminum, Al | 89 |
Copper, Cu | 2.3 |
Magnesium, Mg | 2.3 |
Zinc, Zn | 6.2 |
Zirconium, Zr | 0.12 |
Physical Properties:
Properties | Metric | Imperial |
Density | 2.6-2.8 g/cm3 | 0.0939-0.101 lb/in3 |
Melting point | 494°C | 920°F |
Mechanical Properties:
Properties | Metric | Imperial |
Tensile strength | 515 MPa | 74695 psi |
Yield strength | 455 MPa | 65992 psi |
Fatigue strength | 240 MPa | 34809 psi |
Elastic modulus | 70-80 GPa | 10153-11603 ksi |
Poisson's ratio | 0.33 | 0.33 |
Elongation | 0.11 | 0.11 |
Thermal Properties:
Properties | Conditions | |
T (ºC) | Treatment | |
Thermal conductivity | 180 W/mK | 25 |
Other designations that are equivalent to Aluminum / Aluminum 7050 alloy include:
- AMS 4108
- AMS 4201
- ASTM B247
- ASTM B316
- QQ A-430
Welding:
- Aluminium / Aluminum 7050 alloy should not be welded in order to prevent cracking and development of porosity. The weld joint produced will be weaker than the parent metal. Gas tungsten or gas metal arc welding methods are not preferred for welding this alloy
Heat Treatment:
- Aluminium / Aluminum 7050 alloy can be heat treated at 477°C (890°F). The time taken for this process is based upon the thickness of the section
Specifications:
- Shape: Round
- Alloy: Alloy
- Surface Treatment: Anodizing
- Ultimate Strength (≥ MPa): 170
- Yield (≥ MPa): 200
- High-Precision: Small Tolerance
- Ultra Low Hydrogen Content: <=10ppm
- Transport Package: Standard Seaworthy Packing
- Application: Industrial
- Purity: 82.78%
- Type: Lead Bar
- Hardness: Hb19-150
- Temper: T3 - T8
- Technique: Cold Drawn
- Anodic Coloring: Can Custom Any Color
- Warrenty: 12 Month
Aluminum Alloy 5052 Sheet
Type | Plate |
Brand | PM |
Material | Aluminium |
Is It Anodised | Anodised |
Thickness | 0.14mm-50.00mm, 0.14mm - 50.00mm |
Width | 10mm-1800mm |
Grade | 5000 Series,1000/1060/1050/1100/3003/3105/5083/7068 |
Temper | O-H112 |
Features:
- Roofing industries
- Electrical industries
- Switchgear industries
Specifications:
- Thickness: 0.14mm-50.00mm,0.14mm - 50.00mm or as your requirement
- Width: 10mm-1800mm,10mm-1800mm or as your requirement
- Application: construction/decoration/transportation tool /heat sink,construction/decoration/transportation tool /Heat Sink
- Grade: 5000 Series,1000/1060/1050/1100/3003/3105/5083/7068
- Temper: O-H112
- Type: Plate
Aluminium 2017
Material | Aluminium |
Grade | 2017 |
Color | Silver |
Type | Ingot |
Application | Commercial |
Finish | Plated |
Features:
- Long lasting
- Maintenance free
- Corrosion resistance
Specifications:
Weight% | Al | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others Each | Other Total |
2017 USA | Rem | 0.20-0.8 | 0.7 max | 3.5-4.5 | 0.40-1.0 | 0.40-0.8 | 0.10 max | 0.25 max | 0.15 max | 0.05 max | 0.15 max |
Weight% | Al | Si | Fe | Cu | Mn | Mg | Cr | Zn | Zr + Ti | Others Each | Other Total |
2017A EAA | Rem | 0.20-0.8 | 0.7 max | 3.5-4.5 | 0.40-1.0 | 0.40-1.0 | 0.10 max | 0.25 max | 0.25 max | 0.05 max | 0.15 max |
Aluminium Alloy Powder
Anodised | No |
Weight | 1 KGS |
Material | Aluminium Alloy |
Color | Grey |
Brand | PM |
Is It Anodised | Anodised |
Specifications
- Application:Powder metallurgy, metal material additives,firework etc.
- Material:Pure Titanium or Titanium alloy
- Purity:99.5%
- Shape:Powder
Aluminium Silicon Alloy Powder
Usage | Laboratory |
Anodised | No |
Weight | 1 KGS |
Grade Standard | Technical Grade |
Material | Aluminium Silicon Alloy |
Color | Grey |
Purity | 99.9% |
Specifications:
- Application:Welding materials
- Shape:powder
- Material:Si Al
- color:grey
Aluminium Circle
Material | ALUMINIUM |
Shape | CIRCLE |
Color | Silver |
Brand | PM |
Width | 90-1200mm |
Grade | 1000 Series |
- Thickness: 0.36~8mm
- Width: 90-1200mm
- Application: Kitchenware / cookware
- Grade: 1000 Series
- Temper: O,H12,H14
Aluminium Pipe
Unit Length | 6 m, 24m, 12 m, 18 m |
Surface Finish | Anodized |
Brand | PM |
Color | Silver |
Shape | Round |
Size | 2" |
Material | Aluminium |
Features:
- High compressive strength
- Excellent finish
- Proper coverage
Specifications:
- Diameter: 10 mm - 250 m
- Length: 12000 mm
Aluminium Shim
Material | Aluminium |
Brand | PM |
Color | Silver |
Tolerance | +/- 0.05mm |
CNC Machining or Not | CNC Machining |
Type | Shim |
- Material: Steel
- Material Capabilities: Aluminum,Brass,Bronze,Copper,Hardened Metals,Precious Metals,Steel Alloys
- Type: Broaching,Drilling,Etching / Chemical Machining,Laser Machining,Milling,Other Machining Services,Turning,Wire EDM
- CNC Machining or Not: CNC Machining
- Tolerance: +/- 0.05mm
Aluminum Washer
Surface Finish | Electroplated |
Material | Aluminium |
Shape | Round |
Color | Silver |
Brand | PM |
Thickness | 0.1 mm to 10 mm |
- Brass plain washers as per Indian Standards (I.S.)2016, Din and American Standards in mm & Inches
- M.S. Plain washers as per Indian Standards (I.S.) 2016, Din and American Standards in mm & Inches
- Copper BSP plain washers
- Aluminium Plain Washers
- Fibre Plain washers
- S.S. Plain washers as per Indian Standards (I.S.) 2016 in Grades 202, 304 & 316 in mm & Inches as per the Thicknes you require
Product Range:
- Thickness 0.1 mm to 10 mm
Aluminium Foil
Brand | PM |
Material | Aluminium |
Usage/Application | Commerical |
Form | Foil |
Color | Silver |
Gsm Microne | 300 |
Features:
- Portable
- Durable standard
- High load bearing capacity
Aluminum Marine Grade Pipes
Surface Finish | Anodized |
Hollow Sections | Circular |
Alloy Or Not | Is Alloy |
Brand | PM |
Hardness | Silver |
Shape | Round |
Specifications:
- Bulk density: 1.68-1.85g/cm33
- Application: Cable material
- Material: alminum
- Diameter: 9.5mm/12mm/15mm Etc
Bimetallic Washer
Surface Finish | Metal Coated |
Material | Stainless Steel |
Shape | Round |
Color | Brown |
Brand | PM |
Technique | Hot Rolled |
Features:
- Resistance against chemical
- Precise design
- Excellent finish
Specifications:
- Standard: GB
- Type: Equipment Washer
- Sample: Free
- Round Washer Type: Tlp-(O.D)(I.D)
- Transport Package: 1.Standard Carton Box 2.Pallet 3packing on Request
- Technics: Welding
- Usage: Splicing Fitting
- OEM: Accept
- Square Washer Type: Tlp-(Thickness × Width×length)
- Trademark: Haiwe
1050 Aluminium Coil
Material | Aluminium |
Brand | PM |
Color | Silver |
Shape | Round |
Alloy | With Alloy |
Is It Anodized | Anodized |
Usage/Application | Commercial |
- Grade: 5000 Series
- Technique: Extruded
- Temper: O - H112
- Thickness: 0.2-350mm
- Trademark: YONGHONG
- HS Code: 7606
- Type: Aluminum Sheets
- Shape: Flat
- Surface Treatment: Mill Finish
- Alloy: Alloy
- Certification: ASTM, GB/T
- Width: 200~2300
Lead Ingot
Material | Lead |
Shape | Rectangle |
Color | Silver |
Weight | 42 KG/ingot |
Brand | PM |
Chemical Composition | Sb Sn Zn Fe Cd |
Specifications :
- Weight:42KG/ingot
- Dimensions:Pb99.97%
- Chemical Composition:Sb Sn Zn Fe Cd
- Pb (Min):99.99%
- Alloy Or Not:Non-alloy
- Secondary Or Not:Non-secondary
- Color:Silver White